User guide
(English)
27
・ RMON (Group 1,2,3,9)
・ HTTP/HTTPS server
・ Telnet server/client
・ SSH/SCP
・ TFTP/FTP client
・ BOOTP/DHCP client
・ User authentication
- RADIUS
- TACACS+
・ Management interface
- Command Line Interface (CLI)
This switch software provides two CLI modes. You can set the switch to use either CLI mode.
- AOS ...... menu-based command structure
Refer to the Command Reference Guide (AOS).
- ISCLI ...... tree-based command structure
Refer to the Command Reference Guide (ISCLI)
- Browser-based Interface (BBI)
BBI provides access to the management of the switch through your Web browser. Refer to
the Browser-based Interface Reference Guide.
■Supported technologies in SmartPanel mode
・ Layer 2 switching
・ VLAN (Port-based VLAN, Tagged VLAN)
- Port-based VLAN
- Tagged VLAN
・ Link aggregation (Port trunking)
- static
- LACP
・ Failover feature
・ Jumbo frames (up to 9216 bytes)
・ Auto-MDI/MDIX
・ IGMP Snooping (v1, v2)
・ NTP client
・ Syslog
・ SNMP v1, v2c, v3
・ HTTP/HTTPS server
・ Telnet server/client
・ SSH/SCP
・ TFTP/FTP client
・ DHCP client
・ User authentication
- RADIUS
- TACACS+
・ Management interface
- Command Line Interface (CLI)
This switch software provides a CLI mode (AOS). SmartPanel software does not provide ISCLI.
- Browser-based Interface (BBI)
BBI provides access to the management of the switch through your Web browser. Refer to
the SmartPanel Reference Guide.