User guide

(English)

Network adapter Teaming feature of the CPU Blade does not work.

1. Once the teaming adapter is removed, make sure that each interface is available.

2. Make sure that the teaming is correctly configured and the network is correctly deployed.

3. Turn off Spanning Tree Protocol on the port connected to the network adapter when using "Adapter

Fault Tolerance" (AFT).

Current date and time are incorrect.

1. This Switch Module does not have a battery to maintain the date and time. The date and time on this

switch is reset when it is rebooted or the blade system is powered off. Set the date and time again

after it is rebooted or configure the NTP client on the switch.