Command Reference Guide

N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 85
System host log configuration
The following table describes the Syslog Configuration commands.
Table 78 Syslog Configuration commands
Command
Description
[no] logging host <1-2> address <IP
address>
Sets the IP address of the first or second syslog host. For
example, 100.10.1.1
Command mode: Global configuration
logging host <1-2> severity <1-7>
Sets the severity level of the first or second syslog host
displayed. The default is 7, which means log all the severity
levels.
Command mode: Global configuration
logging host <1-2> facility <1-7>
This option sets the facility level of the first or seconds
syslog host displayed. The default is 0.
Command mode: Global configuration
[no] logging console
Enables or disables delivering syslog messages to the
console. When necessary, disabling console ensures the
switch is not affected by syslog messages. It is enabled by
default.
Command mode: Global configuration
[no] logging log {<feature>}
Displays a list of features for which syslog messages can
be generated. You can choose to enable/disable specific
features or enable/disable syslog on all available features.
Features include:
cfg
cli
console
dot1x
ip
management
ntp
ospf
rmon
spanning-tree-group
ssh
system
ufd
vlan
vrrp
web
Command mode: Global configuration
show logging
Displays the current syslog settings.
Command mode: All