Command Reference Guide

N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (AOS) 122
Routing Information Protocol configuration
Command: /cfg/l3/rip
[Routing Information Protocol Menu]
if - RIP Interface Menu
update - Set update period in seconds
redist - RIP Route Redistribute Menu
on - Globally turn RIP ON
off - Globally turn RIP OFF
current - Display current RIP configuration
The RIP Menu is used for configuring Routing Information Protocol parameters. This option is turned off by default.
The following table describes the RIP Configuration Menu options.
Table 132 RIP Configuration Menu options
Command
Description
if <1-255>
Displays the RIP Interface menu.
update <1-120>
Configures the time interval for sending for RIP table updates, in
seconds.
The default value is 30 seconds.
redist fixed|static|ospf|eospf
Displays the RIP Route Redistribute menu.
on
Globally turns RIP on.
off
Globally turns RIP off. This is the default.
current
Displays the current RIP configuration.