Command Reference Guide

N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (AOS) 131
Table 144 IGMP Snoop Menu options
Command
Description
clear
Removes all VLANs from IGMP Snooping.
fastlv <1-4094>
disable|enable
Enables or disables Fastleave processing. Fastleave allows the switch to
immediately remove a port from the IGMP port list, if the host sends a Leave
message, and the proper conditions are met. This command is disabled by default.
ena
Enables IGMP Snooping.
dis
Disables IGMP Snooping. This is the default.
cur
Displays the current IGMP Snooping parameters.
IGMP static multicast router configuration
Command: /cfg/l3/igmp/mrouter
[Static Multicast Router Menu]
add - Add port as Multicast Router Port
rem - Remove port as Multicast Router Port
cur - Display current Multicast Router configuration
The following table describes the Static Multicast Router Configuration Menu options.
NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast routers is
disabled for that VLAN.
Table 145 IGMP Static Multicast Router Menu
Command
Description
add <port number> <1-4094> <1-2>
Selects a port/VLAN combination on which the static multicast
router is connected, and configures the IGMP version (1 or 2) of
the multicast router.
Note: Port number must be an external port (20-24).
remove <port number> <1-4094> <1-2>
Removes a static multicast router from the selected port/VLAN
combination.
cur
Displays the current IGMP Static Multicast Router parameters.
IGMP filtering configuration
Command: /cfg/l3/igmp/igmpflt
[IGMP Filter Menu]
filter - IGMP Filter Definition Menu
port - IGMP Filtering Port Menu
ena - Enable IGMP Filtering
dis - Disable IGMP Filtering
cur - Display current IGMP Filtering configuration
The following table describes the IGMP Filter Configuration Menu options.
Table 146 IGMP Filtering Menu
Command
Description
filter <1-16>
Displays the IGMP Filter Definition Menu.
port <port number>
Displays the IGMP Filtering Port Menu.
ena
Enables IGMP filtering globally.
dis
Disables IGMP Filtering globally. This is the default.
cur
Displays the current IGMP Filtering parameters.
IGMP filter definition
Command: /cfg/l3/igmp/igmpflt/filter