Command Reference Guide

N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (AOS) 53
Use this command to display link status information about each port on a switch, including:
Port number
Phy-Type (GE or SFP)
Port speed (10 Mb/s, 100 Mb/s, 1000 Mb/s, or any)
Duplex mode (half, full, or any)
Flow control for transmit and receive (no, yes, or any)
Link status (up or down)
Port information
Command: /info/port
Port Tag Media RMON PVID NAME VLAN(s)
---- --- ---- ---- ---- -------------- -------------------------------
1 n Auto d 1 Downlink1 1
2 n Auto d 1 Downlink2 1
3 n Auto d 1 Downlink3 1
4 n Auto d 1 Downlink4 1
5 n Auto d 1 Downlink5 1
6 n Auto d 1 Downlink6 1
7 n Auto d 1 Downlink7 1
8 n Auto d 1 Downlink8 1
9 n Auto d 1 Downlink9 1
10 n Auto d 1 Downlink10 1
11 n Auto d 1 Downlink11 1
12 n Auto d 1 Downlink12 1
13 n Auto d 1 Downlink13 1
14 n Auto d 1 Downlink14 1
15 n Auto d 1 Downlink15 1
16 n Auto d 1 Downlink16 1
17 n Auto d 1 Xconnect1 1
18 n Auto d 1 Xconnect2 1
19 n Auto d 4095 Mgmt 4095
20 n Auto d 1 Uplink1 1
21 n Auto d 1 Uplink2 1
22 n Auto d 1 Uplink3 1
23 n Auto d 1 Uplink4 1
24 n Auto d 1 Uplink5 1
Port information includes:
Port number
Whether the port uses VLAN tagging or not (y or n)
Media type (Auto, Copper, or Fiber)
Whether Remote Monitoring (RMON) is enabled or disabled (e or d)
Port VLAN ID (PVID)
Port name
VLAN membership