Command Reference Guide

N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (AOS) 81
Table 75 SNMP statistics
Statistics
Description
snmpOutGetResponses
The total number of SNMP Get-Response Protocol Data Units (PDUs), which have
been generated by the SNMP protocol entity.
snmpOutTraps
The total number of SNMP Trap Protocol Data Units (PDUs), which have been
generated by the SNMP protocol entity.
snmpSilentDrops
The total number of GetRequest-PDUs, GetNextRequest-PDUs,GetBulkRequest-
PDUs, SetRequest-PDUs, and InformRequest-PDUs delivered to the SNMP entity
which were silently dropped because the size of a reply containing an alternate
Response-PDU with an empty variable-bindings field was too large.
snmpProxyDrops
The total number of GetRequest-PDUs, GetNextRequest-PDUs,GetBulkRequest-
PDUs, SetRequest-PDUs, and InformRequest-PDUs delivered to the SNMP entity
which were silently dropped because the transmission of the message to a proxy
target failed in a manner (other than a time-out) such that no Response-PDU could be
returned.
NTP statistics
Command: /stats/ntp
NTP statistics:
Primary Server:
Requests Sent: 17
Responses Received: 17
Updates: 1
Secondary Server:
Requests Sent: 0
Responses Received: 0
Updates: 0
Last update based on response from primary server.
Last update time: 18:04:16 Tue Mar 13, 2006
Current system time: 18:55:49 Tue Mar 13, 2006
The switch uses NTP (Network Timing Protocol) version 3 to synchronize the switch‘s internal clock with an atomic
time-calibrated NTP server. With NTP enabled, the switch can accurately update its internal clock to be consistent
with other devices on the network and generates accurate syslogs.
The following table describes the NTP statistics:
Table 76 NTP statistics
Statistics
Description
Primary Server
Requests Sent: The total number of NTP requests the switch sent to the primary
NTP server to synchronize time.
Responses Received: The total number of NTP responses received from the
primary NTP server.
Updates: The total number of times the switch updated its time based on the NTP
responses received from the primary NTP server.
Secondary Server
Requests Sent: The total number of NTP requests the switch sent to the
secondary NTP server to synchronize time.
Responses Received: The total number of NTP responses received from the
secondary NTP server.
Updates: The total number of times the switch updated its time based on the NTP
responses received from the secondary NTP server.
Last update based on
response from primary
server
Last update of time on the switch based on either primary or secondary NTP
response received.
Last update time
The time stamp showing the time when the switch was last updated.
Current system time
The switch system time when the command /stats/ntp was issued.