Command Reference Guide

N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (AOS) 88
The following table describes the SSHD Configuration Menu options.
Table 81 SSHD Configuration Menu options
Command
Description
intrval <0-24>
Defines interval for auto-generating the RSA server key. The switch will
auto-generate the RSA server key at the interval defined in this
command. The value of zero (0) means the RSA server key auto-
generation is disabled. If the switch has been busy performing any other
key generation and the assigned time of interval expires, the RSA
server will skip generating the key.
scpadm
Defines the administrator password that is for Secure Copy (SCP) only.
The username for this SCP administrator is scpadmin.
Typically, SCP is used to copy files securely from one machine to
another. In the switch, SCP is used to download and upload the switch
configuration using secure channels.
hkeygen
Generates the RSA host keys manually. The switch creates this key
automatically while configuring the switch with Secure Shell (SSH). But
you can generate the key manually by using this command if you need
to overwrite the key for security reasons. The command will take effect
immediately without executing the apply command.
skeygen
Generates the RSA server key. The switch creates this key
automatically while configuring the switch with Secure Shell (SSH). You
can generate the key manually by using this command if you need to
overwrite the key for security reasons. The command will take effect
immediately without executing the apply command.
sshport <TCP port number>
Sets the SSH server port number.
ena
Enables the SCP apply and save.
dis
Disables the SCP apply and save. This is the default for SCP.
on
Enables the SSH server.
off
Disables the SSH server. This is the default for the SSH server.
cur
Displays the current SSH server configuration.