Command Reference Guide

N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (AOS) 97
SNMPv3 Target Address Table configuration
Command: /cfg/sys/ssnmp/snmpv3/taddr <taddr number>
[SNMPv3 snmpTargetAddrTable 1 Menu]
name - Set target address name
addr - Set target transport address IP
port - Set target transport address port
taglist - Set tag list
pname - Set targetParams name
del - Delete targetAddrTable entry
cur - Display current targetAddrTable configuration
This menu allows you to configure an entry of a transport address that transmits SNMP traps.
The following table describes the SNMPv3 Target Address Table Configuration Menu options.
Table 92 SNMPv3 Target Address Table Configuration Menu options
Command
Description
name <1-32
characters>
Configures the locally arbitrary, but unique identifier, target address name associated with
this entry.
addr <transport
address ip>
Configures a transport address IP that can be used in the generation of SNMP traps.
port <transport
address port>
Configures a transport address port that can be used in the generation of SNMP traps.
taglist <1-255
characters>
Configures a list of tags (up to 255 characters maximum) that are used to select target
addresses for a particular operation.
pname <1-32
characters>
Defines the name as defined in /cfg/sys/ssnmp/snmpv3/tparam/name.
del
Deletes the Target Address Table entry.
cur
Displays the current Target Address Table configuration.