Handbook

N8406-023 1Gb Intelligent L3 Switch Application Guide 89
c. Select a Class of Service queue (CoS).
d. Enter a value for the weight of the Class of Service queue.
e. Click Submit.
4. Apply, verify, and save the configuration.
Queuing and scheduling
The switch has two output Class of Service queues (COSq) per port (0-1), into which each packet is placed. Each
packet‘s 802.1p priority determines its COSq, except when an ACL action sets the COSq of the packet.
You can configure the following attributes for COS queues:
Map 802.1p priority value to a COS queue.
Define the scheduling weight of each COS queue.
Use the 802.1p menu (/cfg/qos/8021p) to configure Class of Service queues.
1. Apply
3. Save
2. Verify