Reference Guide

N8406-023 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide 116
NTP Configuration
To display the following form, select System > NTP.
This form enables you to synchronize the switch clock to a Network Time Protocol (NTP) server. By default,
this option is disabled.
The following table describes NTP Configuration controls:
Table 90 NTP Configuration controls
Control
Description
NTP Server IP Address
Configures the IP address of the primary NTP server to which you
want to synchronize the switch clock.
Secondary NTP Server IP Address
Configures the IP address of the secondary NTP server to which you
want to synchronize the switch clock.
Resync Interval (1-44640)
Specifies the interval, that is, how often, in minutes (1-44640), to
re-synchronize the switch clock with the NTP server. The default is
1440 minutes.
Enable/Disable NTP Service
Enables or disables the NTP synchronization service. The default is
disabled.