Reference Guide

N8406-023 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide 117
Syslog and Trap Feature Configuration
To display the following form, select System > Syslog/Trap Features.
The following table describes Syslog and Trap Feature Configuration controls:
Table 91 Syslog and Trap Feature Configuration controls
Control
Description
Enable/Disable Syslog and Trap of Console
Enables or disables syslog messages of console-related events. The
default is enabled.
Enable/Disable Syslog and Trap of System
Enables or disables syslog messages of system-related events. The
default is enabled.
Enable/Disable Syslog and Trap of Management
Enables or disables syslog messages of management-related
events. The default is enabled.
Enable/Disable Syslog and Trap of CLI
Enables or disables syslog messages of CLI-related events. The
default is enabled.
Enable/Disable Syslog and Trap of STP
Enables or disables syslog messages of STP-related events. The
default is enabled.
Enable/Disable Syslog and Trap of VLAN
Enables or disables syslog messages of VLAN-related events. The
default is enabled.
Enable/Disable Syslog and Trap of WEB
Enables or disables syslog messages of Web-related events. The
default is enabled.
Enable/Disable Syslog and Trap of IP
Enables or disables syslog messages of IP-related events. The
default is enabled.
Enable/Disable Syslog and Trap of VRRP
Enables or disables syslog messages of VRRP-related events. The
default is enabled.
Enable/Disable Syslog and Trap of SSH
Enables or disables syslog messages of SSH-related events. The
default is enabled.