Manualshelf

Reference Guide

ManualsBrandsNEC ManualsBlade ServersNEC N8406-023 1Gb Intelligent L3 Switch
131132133134135136137138139140
N8406-023 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide 134
VLAN Configuration
To display the following form, go to the VLANs Configuration form. Select a VLAN ID, or open the Virtual LANs
folder and click Add VLAN.
The commands on this form configure VLAN attributes, change the status of the VLAN, delete the VLAN, and
change the port membership of the VLAN.
By default, the VLAN menu option is disabled except VLAN 1 and 4095, which is enabled all the time. This
switch supports a maximum of 1,000 VLANs. VLAN 4095 is reserved for switch management interface.
The following table describes the VLAN Configuration controls:
Table 104 VLAN Configuration controls
Control
Description
VLAN Name
Assigns a name to the VLAN or changes the existing name. The default VLAN name is
the first one.
VLAN ID (1-4095)
Assigns a numeric identifier to the VLAN.
VLAN State
Enables or disables the VLAN.
Spanning Tree Group
Assigns a VLAN to a Spanning Tree Group. STG number is assigned STGs 1-128 for
STP/PVST+, only STG 1 for RSTP, and STGs 0-32 for MSTP (STG 0 is CIST).
Ports Available
Lists the ports that can be added to the VLAN.
Ports in Vlan
Lists the ports that are members of the VLAN.
Select a port number in the Ports Available list and click Add to add the port to the VLAN
membership.
Select a port number in the Ports in VLAN list and click Remove to remove the port from
the VLAN membership.