Reference Guide

N8406-023 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide 145
LACP Configuration
To display the following form, select Layer 2 > LACP.
The following table describes the Switch LACP Configuration controls:
Table 113 Switch LACP Configuration controls
Control
Description
LACP System Priority (1-65535)
Defines the priority value (1 through 65535) for the switch. Lower numbers provide
higher priority. The default value is 32768.
Timeout time
Defines the timeout period before invalidating LACP data from a remote partner.
Choose short (3 seconds) or long (90 seconds). The default value is long.
Note: It is recommended that you use a timeout value of long, to reduce
LACPDU processing. If your switch‘s CPU utilization rate remains at 100% for
periods of 90 seconds or more, consider using static trunks instead of LACP.