Reference Guide

N8406-023 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide 157
IP Static Route Configuration
To display the following form, go to the IP Static Routes Configuration form. Select a static route ID number, or
open the Network Routes folder and click Add Network Route.
The following table describes the IP Static Route Configuration controls:
Table 125 IP Static Route Configuration controls
Control
Description
Route Table Index (1-128)
Sets the numeric identifier for this index.
Destination IP
Enter the destination IP address for this route.
Mask
Enter the subnet mask for this route.
Gateway
Enter the IP address of the gateway associated with this route.
Interface Number (1-256)
Assigns an interface number to this route.
Static ARP Configuration
To display the following form, select Layer 3 > ARP (click the underlined text, not the folder).
This form summarizes the current static ARP entries. Select a static ARP ID number to display the IP Static
ARP Configuration form.