Reference Guide

N8406-023 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide 171
OSPF General Configuration
To display the following form, select Layer 3 > OSPF Routing Protocol > General.
The following table describes the OSPF General Configuration controls:
Table 138 OSPF General Configuration controls
Control
Descriptions
Globally Enable OSPF?
Enables or disables OSPF. The default is disabled.
External LSDB Limit (0-2000)
Sets the link state database limit. Enter zero (0) to indicate that there is
no limit.
Default Route Metric (1-16777215, 0=none)
Sets one default route metric.
Default Route Metric Type
Sets the default-route metric type. Enter none to indicate that there is no
default.