Reference Guide

N8406-023 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide 174
OSPF Summary Ranges Configuration
To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Summary Ranges (click the
underlined text, not the folder).
This form provides a summary of the state of OSPF summary ranges.
OSPF Summary Range Configuration
To display the following form, go to the OSPF Summary Ranges Configuration form. Select a summary range
number, or open the OSPF Summary Ranges folder and click Add Summary Range.
The following table describes the OSPF Summary Range Configuration controls:
Table 141 OSPF Summary Range Configuration controls
Control
Descriptions
Range Number (1-16)
Assigns a numeric identifier to the OSPF summary range.
Enabled?
Enables or disables the OSPF summary range. The default is disabled.
Hide Range
Hides or shows the OSPF summary range.
Area number (0-2)
Defines the area index used by the switch.
IP Address
Defines the base IP address for the range.
Subnet Mask
Defines the IP address mask for the range.