Reference Guide

N8406-023 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide 179
The following table describes OSPF Hosts Configuration controls:
Table 145 OSPF Hosts Configuration controls
Control
Description
Search Operation
To focus the search for an OSPF host, enter search parameters:
Host ID
IP address and subnet mask
Area number
State
Fields that have a value of ―any‖ are ignored during the search.
Choose a search operation:
or: Search for OSPF hosts specified in the Search range that meet any of the criteria
entered.
and: Search for OSPF hosts specified in the Search range that meet all of the criteria
entered.
Click Search to display OSPF hosts that fit the range and meet the criteria entered.
OSPF Host Configuration
To display the following form, go to the OSPF Hosts Configuration form. Select a host number, or open the
OSPF Hosts folder and click Add OSPF Host.
The following table describes the OSPF Host Configuration controls:
Table 146 OSPF Host Configuration controls
Control
Descriptions
Host Identifier (1-128)
Assigns a numeric identifier to the OSPF host.
IP Address
Defines the base IP address for the host entry.
Enabled?
Enables or disables the OSPF host. The default is disabled.
Area Number (0-2)
Defines the area index used by the OSPF host. The default is 0.
Output Cost (1-65535)
Defines the cost value of the host. The default is 1.