Reference Guide

N8406-023 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide 184
RIP General Configuration
To display the following form, select Layer 3 > Routing Information Protocol > General.
The following table describes the RIP Interface Configuration controls:
Table 151 RIP General Configuration controls
Control
Descriptions
Globally Enable RIP?
Globally enables or disables RIP. The default is disabled.
Update Period (1-120 sec)
Configures the time interval for sending for RIP table updates, in seconds.
The default value is 30 seconds.
Virtual Routers Configuration
To display the following form, select Layer 3 > Virtual Router Redundancy Protocol > Virtual Routers (click the
underline text, not the folder).