Reference Guide

N8406-023 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide 41
Table 26 Route Table Information controls
Control
Description
Type
Displays the IP route type. See the IP Routing Type information table for
more detail.
Tag
Displays the IP route tag. See the IP Routing Tag information table for more
detail.
Metric
Displays the value of the IP route metric.
IF
Displays the interface number associated with the IP route.
The following table describes the Route Table Type parameter.
Table 27 IP Routing Type information
Field
Description
indirect
The next hop to the host or subnet destination will be forwarded through a
router at the Gateway address.
direct
Packets will be delivered to a destination host or subnet attached to the
switch.
local
Indicates a route to one of the switch‘s IP interfaces.
broadcast
Indicates a broadcast route.
martian
The destination belongs to a host or subnet which is filtered out. Packets to
this destination are discarded.
multicast
Indicates a multicast route.
The following table describes the Route Table Tag parameter.
Table 28 IP Routing Tag information
Field
Description
fixed
The address belongs to a host or subnet attached to the switch.
static
The address is a static route which has been configured on the switch.
addr
The address belongs to one of the switch‘s IP interfaces.
rip
The address was learned by the Routing Information Protocol (RIP).
ospf
The address was learned by Open Shortest Path First (OSPF).
broadcast
The address is a broadcast address.
multicast
The address is a multicast address.
martian
The address belongs to a filtered group.