Reference Guide

N8406-023 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide 50
RIP Interfaces Dashboard
To display the following form, select Layer 3 > RIP > RIP Interfaces (click the underlined text, not the folder).
The following table describes the RIP Interfaces Dashboard controls:
Table 39 RIP Interfaces Dashboard controls
Control
Description
Search Range
To search for a RIP interface, enter a range of interface ID numbers in the
From and To fields.
Search Options
To focus the search for a RIP interface, enter optional search parameters:
RIP version
RIP state
Fields that have a value of ―any‖ are ignored during the search.
Choose a search operation:
or: Search for RIP interfaces specified in the search range that meet
any of the criteria entered.
and: Search for RIP interfaces specified in the search range that meet
all of the criteria entered.
Click Search to display RIP interface that fit the range and meet the criteria
entered.
Interface ID
Displays each interface number.
RIP State
Displays the current status of RIP in the interface: enabled or disabled.
RIP Version
Displays the RIP version used by the interface.
Default Action
Displays the default action for RIP on the interface.
Supply Updates
Displays whether Supply Updates is enabled or disabled.
Listen to Updates
Displays whether Listen to Updates is enabled or disabled.
Poisoned Reverse
Displays whether Poisoned Reverse is enabled or disabled.
Triggered Updates
Displays whether Triggered Updates is enabled or disabled.
Multicast Updates
Displays whether Multicast Updates is enabled or disabled.
Metric
Displays the route metric for the interface.
Auth Type
Displays the authentication type for the interface.
Auth Key
Displays the authentication key for the interface.