User Guide

(English)

Additional references

Detailed information about how to configure this product is described in the reference guides listed below. These

guides are contained on the included CD-ROM.

・ 1Gb Intelligent L3 Switch Application Guide

・ 1Gb Intelligent L3 Switch Command Reference Guide (AOS)

・ 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI)

・ 1Gb Intelligent L3 Switch Browser-based Interface Reference Guide

Product Overview

The features of this product are briefly described below.

Features

The N8406-023 1Gb Intelligent L3 Switch is a Switch Module for the Blade Enclosure. The Switch Module is used

to connect the CPU Blade with the external network through the Ethernet port. The Switch Module has 16 ports

dedicated to the CPU Blade, 2 ports dedicated to communication between two Switch Modules that are inserted in

adjacent Switch Module slots, 5 uplink ports, and one port dedicated to the management network. Four of the five

uplink ports can be either copper or fiber using optional N8406-024 1000Base-SX SFP modules.

■Supported technologies

・ Routing protocol

- static

- RIP v1, v2

- OSPF

・ VRRP

・ VLAN

- Port-based VLAN

- Tagged VLAN

・ Spanning Tree

- Spanning Tree Protocol (802.1D)

- Rapid Spanning Tree Protocol (802.1w)

- Multiple Spanning Tree Protocol (802.1s)

・ Link aggregation (Port trunking)

- static

- LACP

・ Uplink Failure Detection (Trunk failover feature)

・ QoS

・ Jumbo frames (up to 9216 bytes)

・ Port mirroring

・ Auto-MDI/MDIX

・ IGMP Snooping (v1, v2)

・ NTP client

・ DNS client

・ Syslog

・ SNMP v1, v2c, v3