User Guide

(English)
39
Network Cables
The network cables must have the following specifications:
Connector
RJ-45
Type of Cable
UTP/STP twisted-pair cable
Eight wicks, four pairs
Regulation
EIA/TIA standard
10Base-T
Category 3
100Base-TX
Category 5 or higher
1000Base-T
Category 5e or higher
Cable Length
(max.)
100m
Connector
LC connector
(when N8406-24 1000Base-SX SFP module is installed)
Type of Cable
Multimode Fiber (MMF) cable
Core size 50um/62.5um
Cable Length
(max.)
275m (when the core size is 62.5um)
550m (when the core size is 50um)
IMPORTANT:
・ Contact your service representative for installing optical fiber cables.
Experts must install the cables.
・ Handle optical fiber cables carefully.
・ Keep more than a 50 mm bending radius when you bend a optical
fiber cable.
・ Install the cable into the SFP connector carefully. Do not forcibly install
the cable to avoid damaging it.
・ Make sure that the connector of the cable is clean and is not
damaged.
・ Make sure that your cable meets the specifications for the SFP
module.
・ Do not allow the cable or connector to become dirty.
・ Do not apply any impact or pressure to the cable and its connector.
Do not step on the cable or put something heavy on it.