Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 103
Port configuration
Command: /cfg/port <port number>
[Port 1 Menu]
gig - Gig Phy Menu
aclqos - Acl/Qos Configuration Menu
8021ppri - Set default 802.1p priority
pvid - Set default port VLAN id
name - Set port name
rmon - Enable/Disable RMON for port
tag - Enable/disable VLAN tagging for port
tagpvid - Enable/disable tagging on pvid
brate - Set BroadCast Threshold
mrate - Set MultiCast Threshold
drate - Set Dest. Lookup Fail Threshold
ena - Enable port
dis - Disable port
cur - Display current port configuration
This menu enables you to configure settings for individual switch ports. This command is enabled by
default.
NOTE: Port 17 is a port for switch management interface.
The following table describes the Port Configuration Menu options.
Table 100 Port Configuration Menu options
Command
Description
gig
Displays theGigabit Ethernet Physical Link Menu.
aclqos
Displays the Access Control List (ACL)/Quality of Service (QoS)
configuration menu.
8021ppri <0-7>
Configures the port‘s 802.1p priority level.
pvid <1-4094>
Sets the default VLAN number which will be used to forward
frames which are not VLAN tagged. The default number for all
ports except Port 17 is 1.
Note: VLAN 4095 is a VLAN for switch management interface.
name <1-64 characters>|none
Sets a name for the port (maximum 64 characters). The assigned
port name displays next to the port number on some information
and statistics screens.
rmon enable|disable
Enables or disables Remote Monitoring for the port. The default is
disabled. RMON must be enabled for any RMON configurations
to function.
tag enable|disable
Disables or enables VLAN tagging for this port. The default is
disabled.
tagpvid enable|disable
Disables or enables VLAN tag persistence. When disabled, the
VLAN tag is removed from packets whose VLAN tag matches
the port PVID. The default is enabled.
brate <0-262143>|dis
Limits the number of broadcast packets per second to the
specified value. If disabled (dis), the port forwards all broadcast
packets.
mrate <0-262143>|dis
Limits the number of multicast packets per second to the
specified value. If disabled (dis), the port forwards all multicast
packets.
drate <0-262143>|dis
Limits the number of unknown unicast packets per second to the
specified value. If disabled (dis), the port forwards all unknown
unicast packets.
ena
Enables the port.
dis
Disables the port. To temporarily disable a port without changing
its configuration attributes, see the ―Temporarily disabling a port‖
section later in this chapter.
cur
Displays current port parameters.