Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 118
Table 119 LACP Configuration Menu options
Command
Description
port <port number>
Displays the LACP Port menu.
cur
Display current LACP configuration.
LACP Port configuration
Command: /cfg/l2/lacp/port <port number>
[LACP Port 2 Menu]
mode - Set LACP mode
prio - Set LACP port priority
adminkey - Set LACP port admin key
cur - Display current LACP port configuration
The following table describes the LACP Port Configuration Menu options.
Table 120 LACP Port Configuration Menu options
Command
Description
mode off|active|passive
Set the LACP mode for this port, as follows:
off
Turn LACP off for this port. You can use this port to manually
configure a static trunk. The default value is off.
active
Turn LACP on and set this port to active. Active ports initiate
LACPDUs.
passive
Turn LACP on and set this port to passive. Passive ports do not initiate
LACPDUs, but respond to LACPDUs from active ports.
prio <1-65535>
Sets the priority value for the selected port. Lower numbers provide
higher priority. Default is 32768.
adminkey <1-65535>
Set the admin key for this port. Only ports with the same admin key and
oper key (operational state generated internally) can form a LACP trunk
group.
cur
Displays the current LACP configuration for this port.
VLAN configuration
Command: /cfg/l2/vlan <1-4094>
[VLAN 1 Menu]
name - Set VLAN name
stg - Assign VLAN to a Spanning Tree Group
add - Add port to VLAN
rem - Remove port from VLAN
def - Define VLAN as list of ports
ena - Enable VLAN
dis - Disable VLAN
del - Delete VLAN
cur - Display current VLAN configuration
The commands in this menu configure VLAN attributes, change the status of the VLAN, delete the VLAN,
and change the port membership of the VLAN.
By default, the VLAN menu option is disabled except VLAN 1 and 4095, which is always enabled. This
switch supports a maximum of 1,000 VLANs. VLAN 4095 is reserved for switch management interface.
NOTE: See the N8406-026 10Gb Intelligent L3 Switch Application Guide for information on VLANs.