Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 122
The following table describes the ARP Configuration Menu options.
Table 126 ARP Configuration Menu options
Command
Description
static
Displays the Static ARP Menu.
rearp <2-120>
Defines re-ARP period in minutes. You can set this duration between 2 and 120
minutes. The default value is 10 minutes.
cur
Displays the current ARP configurations.
Static ARP configuration
Command: /cfg/l3/arp/static
[Static ARP Menu]
add - Add a parmanent ARP entry
del - Delete an ARP entry
clear - Clear static ARP entries
cur - Display current static ARP configuration
The following table describes the Static ARP Menu optionons.
Table 127 Static ARP Configuration Menu options
Command
Description
add <IP address> <MAC address>
<VLAN number> <port number>
Adds a single ARP entry to switch memory.
del <IP address>
Removes a single ARP entry from switch memory.
clear
Clears the entire ARP list from switch memory.
cur
Displays the current ARP configurations.
IP Forwarding configuration
Command: /cfg/l3/frwd
[IP Forwarding Menu]
dirbr - Enable/disable forwarding directed broadcasts
on - Globally turn IP Forwarding ON
off - Globally turn IP Forwarding OFF
cur - Display current IP Forwarding configuration
The following table describes the IP Forwarding Configuration Menu options.
Table 128 IP Forwarding Configuration Menu options
Command
Description
dirbr disable|enable
Enables or disables forwarding directed broadcasts. This
command is disabled by default.
on
Enables IP forwarding (routing) on the switch.
off
Disables IP forwarding (routing) on the switch. Forwarding is turned
off by default.
cur
Displays the current IP forwarding settings.