Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 123
Network Filter configuration
Command: /cfg/l3/nwf <1-256>
[IP Network Filter 1 Menu]
addr - IP Address
mask - IP Subnet mask
enable - Enable Network Filter
disable - Disable Network Filter
delete - Delete Network Filter
current - Display current Network Filter configuration
The following table describes the Network Filter Configuration Menu options.
Table 129 Network Filter Configuration Menu options
Command
Description
addr <IP address>
Sets the starting IP address for this filter.
mask <IP subnet mask>
Sets the IP subnet mask that is used with /cfg/l3/nwf/addr to
define the range of IP addresses that will be accepted by the
peer when the filter is enabled.
enable
Enables the Network Filter configuration.
disable
Disables the Network Filter configuration.
delete
Deletes the Network Filter configuration.
current
Displays the current the Network Filter configuration.
Route Map configuration
Command: /cfg/l3/rmap <1-32>
[IP Route Map 1 Menu]
alist - Access List number
metric - Set metric of the matched route
type - Set OSPF metric-type of the matched route
prec - Set the precedence of this route map
enable - Enable route map
disable - Disable route map
delete - Delete route map
current - Display current route map configuration
Routing maps control and modify routing information. The map number (1-32) represents the routing map
you wish to configure.
The following table describes the Route Map Configuration Menu options.
Table 130 Route Map Configuration Menu options
Command
Description
alist <1-8>
Displays the Access List menu.
metric <0-16777214>|none
Sets the metric of the matched route.
type 1|2|none
Assigns the type of OSPF metric.
Type 1—External routes are calculated using both internal
and external metrics.
Type 2—External routes are calculated using only the external
metrics. Type 2 routes have more cost than Type 1.
none—Removes the OSPF metric.
prec <1-255>
Sets the precedence of the route map. The smaller the value, the
higher the precedence. Default value is 10.
enable
Enables the route map.
disable
Disables the route map.
delete
Deletes the route map.
current
Displays the current route configuration.