Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 124
IP Access List configuration
Command: /cfg/l3/rmap <1-32>/alist <1-8>
[IP Access List 1 Menu]
nwf - Network Filter number
metric - Metric
action - Set Network Filter action
enable - Enable Access List
disable - Disable Access List
delete - Delete Access List
current - Display current Access List configuration
The route map number (1-32) and the access list number (1-8) represent the IP access list you wish to
configure. The following table describes the IP Access List Configuration Menu options.
Table 131 IP Access List Configuration Menu options
Command
Description
nwf <1-256>
Sets the network filter number.
metric <1-16777214>|none
Sets the metric value in the AS-External (ASE) LSA.
action permit|deny
Permits or denies action for the access list.
enable
Enables the access list.
disable
Disables the access list.
delete
Deletes the access list.
current
Displays the current Access List configuration.
Routing Information Protocol configuration
Command: /cfg/l3/rip
[Routing Information Protocol Menu]
if - RIP Interface Menu
update - Set update period in seconds
redist - RIP Route Redistribute Menu
on - Globally turn RIP ON
off - Globally turn RIP OFF
current - Display current RIP configuration
The RIP Menu is used for configuring Routing Information Protocol parameters. This option is turned off by
default.
The following table describes the RIP Configuration Menu options.
Table 132 RIP Configuration Menu options
Command
Description
if <1-249>
Displays the RIP Interface menu.
update <1-120>
Configures the time interval for sending for RIP table updates, in
seconds.
The default value is 30 seconds.
redist fixed|static|ospf|eospf
Displays the RIP Route Redistribute menu.
on
Globally turns RIP on.
off
Globally turns RIP off. This is the default.
current
Displays the current RIP configuration.