Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 126
RIP Route Redistribution configuration
Command: /cfg/l3/rip/redist fixed|static|ospf|eospf
[RIP Redistribute Fixed Menu]
add - Add rmap into route redistribution list
rem - Remove rmap from route redistribution list
export - Export all routes of this protocol
cur - Display current route-maps added
The following table describes the RIP Route Redistribute Menu options.
Table 134 RIP Redistribute Configuration Menu options
Command
Description
add <1-32>|all
Adds selected routing maps to the RIP route redistribution list. To
add all the 32 route maps, enter all. To add specific route maps,
enter routing map numbers one per line, NULL at the end.
This option adds a route map to the route redistribution list. The
routes of the redistribution protocol matched by the route maps
in the route redistribution list will be redistributed.
remove <1-32>|all
Removes the route map from the RIP route redistribution list.
Removes routing maps from the list. To remove all 32 route maps,
enter all. To remove specific route maps, enter routing map
numbers one per line, NULL at end.
export <metric 1-15>|none
Exports the routes of this protocol in which the metric and metric
type are specified. To remove a previous configuration and stop
exporting the routes of the protocol, enter none.
cur
Displays the current RIP route redistribute configuration.