Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 131
The following table describes the OSPF Host Entry Configuration Menu options.
Table 140 OSPF Host Entry Configuration Menu options
Command
Description
addr <IP address>
Configures the base IP address for the host entry. For example,
100.10.1.1
aindex <0-2>
Configures lays the area index of the host. The default is 0.
cost <1-65535>
Configures the cost value of the host. The default value is 1.
enable
Enables OSPF host entry.
disable
Disables OSPF host entry. This is the default.
delete
Deletes OSPF host entry.
cur
Displays the current OSPF host entries.
OSPF Route Redistribution configuration
Command: /cfg/l3/ospf/redist fixed|static|rip
[OSPF Redistribute Fixed Menu]
add - Add rmap into route redistribution list
rem - Remove rmap from route redistribution list
export - Export all routes of this protocol
cur - Display current route-maps added
The following table describes the OSPF Route Redistribution Configuration Menu options.
Table 141 OSPF Route Redistribution Configuration Menu options
Command
Description
add <1-32> <1-32>
...|all
Adds selected routing maps to the rmap list. To add all the 32 route maps,
enter all. To add specific route maps, enter routing map numbers one per
line, NULL at the end.
This option adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution
list will be redistributed.
rem <1-32> <1-32> ...
|all
Removes the route map from the route redistribution list.
Removes routing maps from the rmap list. To remove all 32 route maps, enter
all. To remove specific route maps, enter routing map numbers one per line,
NULL at end.
export <1-16777214>
<1|2>|none
Exports the routes of this protocol as external OSPF AS-external LSAs in which
the metric and metric type are specified. To remove a previous configuration
and stop exporting the routes of the protocol, enter none.
cur
Displays the current route map settings.
OSPF MD5 Key configuration
Command: /cfg/l3/ospf/md5key <key ID>
[OSPF MD5 Key 1 Menu]
key - Set authentication key
delete - Delete key
cur - Display current MD5 key configuration
The following table describes the OSPF MD5 Key Configuration Menu options.
Table 142 OSPF MD5 Key Configuration Menu options
Command
Description
key
Sets the authentication key (up to 16 characters) for this OSPF packet.
delete
Deletes the authentication key for this OSPF packet.
cur
Displays the current MD5 key configuration.