Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 134
IGMP static multicast router configuration
Command: /cfg/l3/igmp/mrouter
[Static Multicast Router Menu]
add - Add port as Multicast Router Port
rem - Remove port as Multicast Router Port
cur - Display current Multicast Router configuration
The following table describes the Static Multicast Router Configuration Menu options.
NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast
routers is disabled for that VLAN.
Table 146 IGMP Static Multicast Router Menu
Command
Description
add <port number> <1-4094> <1-3>
Selects a port/VLAN combination on which the static
multicast router is connected, and configures the IGMP
version (1 , 2 or 3) of the multicast router
remove <port number> <1-4094> <1-3>
Removes a static multicast router from the selected
port/VLAN combination.
cur
Displays the current IGMP Static Multicast Router
parameters.
IGMP filtering configuration
Command: /cfg/l3/igmp/igmpflt
[IGMP Filter Menu]
filter - IGMP Filter Definition Menu
port - IGMP Filtering Port Menu
ena - Enable IGMP Filtering
dis - Disable IGMP Filtering
cur - Display current IGMP Filtering configuration
The following table describes the IGMP Filter Configuration Menu options.
Table 147 IGMP Filtering Menu
Command
Description
filter <1-16>
Displays the IGMP Filter Definition Menu.
port <port number>
Displays the IGMP Filtering Port Menu.
ena
Enables IGMP filtering globally.
dis
Disables IGMP Filtering globally. This is the default.
cur
Displays the current IGMP Filtering parameters.
IGMP filter definition
Command: /cfg/l3/igmp/igmpflt/filter
[IGMP Filter 1 Definition Menu]
range - Set IP Multicast address range
action - Set filter action
ena - Enable filter
dis - Disable filter
del - Delete filter
cur - Display current IGMP filter configuration