Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 135
The following table describes the IGMP Filter Definition Menu options.
Table 148 IGMP Filter Definition Menu
Command
Description
range <IP multicast address> <IP
multicast address>
Configures the range of IP multicast addresses for this filter.
Enter the first IP multicast address of the ranger, followed by
the second IP multicast address of the range.
action allow|deny
Allows or denies multicast traffic for the IP multicast
addresses specified.
ena
Enables this IGMP filter.
dis
Disables this IGMP filter. This is the default.
del
Deletes this filter‘s parameter definitions.
cur
Displays the current IGMP filter.
IGMP filtering port configuration
Command: /cfg/l3/igmp/igmpflt/port
[IGMP Port 18 Menu]
filt - Enable/disable IGMP Filtering on port
add - Add IGMP filter to port
rem - Remove IGMP filter from port
cur - Display current IGMP Filtering Port configuration
The following table describes the IGMP Port Filtering Configuration Menu options.
Table 149 IGMP Filtering Port Menu
Command
Description
filt enable|disable
Enables or disables IGMP Filtering on this port. The default is disabled.
add <1-16>
Adds an IGMP filter to this port.
rem <1-16>
Removes an IGMP filter from this port.
cur
Displays the current IGMP filter parameters for this port.