Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 142
VRRP Tracking configuration
Command: /cfg/l3/vrrp/track
[VRRP Tracking Menu]
vrs - Set priority increment for virtual router tracking
ifs - Set priority increment for IP interface tracking
ports - Set priority increment for VLAN switch port tracking
cur - Display current VRRP Priority Tracking configuration
This menu is used for setting weights for the various criteria used to modify priority levels during the master
router election process. Each time one of the tracking criteria is met, the priority level for the virtual router
is increased by an amount defined through this menu.
NOTE: These priority tracking options only define increment values. These options do not affect the
VRRP master router election process until options under the VRRP Virtual Router Priority Tracking
Menu are enabled.
The following table describes the VRRP Tracking Configuration Menu options.
Table 158 VRRP Tracking Configuration Menu options
Command
Description
vrs <0-254>
Defines the priority increment value (0 through 254) for virtual routers in
master mode detected on this switch. The default value is 2.
ifs <0-254>
Defines the priority increment value (0 through 254) for active IP interfaces
detected on this switch. The default value is 2.
ports <0-254>
Defines the priority increment value (0 through 254) for active ports on the
virtual router‘s VLAN. The default value is 2.
cur
Displays the current configuration of priority tracking increment values.