Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 148
ACL Re-mark configuration
Command: /cfg/acl/acl <ACL number>/re-mark
[Re-mark Menu]
inprof - In Profile Menu
outprof - Out Profile Menu
reset - Reset re-mark settings
cur - Display current settings
You can choose to re-mark IP header data for the selected ACL. You can configure different remark
values, based on whether packets fall within the ACL Metering profile, or out of the ACL Metering profile.
Table 167 ACL Re-mark Configuration Menu options
Command
Description
inprof
Displays the Re-mark In-Profile Menu.
outprof
Displays the Re-mark Out-of-Profile Menu.
reset
Reset ACL Re-mark parameters to their default values.
cur
Displays the current ACL re-mark parameters.
ACL Re-mark In-Profile configuration
Command: /cfg/acl/acl <ACL number>/re-mark/inprof
[Re-marking - In Profile Menu]
up1p - Set Update User Priority Menu
updscp - Set the update DSCP
reset - Reset in profile settings
cur - Display current settings
Table 168 ACL Re-mark In-Profile Configuration Menu options
Command
Description
up1p
Displays the Re-Mark In-Profile Update User Priority Menu.
updscp <0-63>
Sets the DiffServ Code Point (DSCP) of In-Profile packets to the selected
value.
reset
Resets the update DSCP parameters to their default values.
cur
Displays the current ACL re-mark in-profile parameters.
ACL Re-mark In-Profile Update User Priority configuration
Command: /cfg/acl/acl <ACL number>/re-mark/inprof/up1p
[Update User Priority Menu]
value - Set the update user priority
utosp - Enable/Disable use of TOS precedence
reset - Reset in profile up1p settings
cur - Display current settings
Table 169 ACL Update User Priority Configuration Menu options
Command
Description
value <0-7>
Defines 802.1p value. The value is the priority bits information in the
packet structure.
utosp enable|disable
Enable or disable mapping of TOS (Type of Service) priority to 802.1p
priority for In-Profile packets. When enabled, the TOS value is used to set
the 802.1p value. The default is disabled.
reset
Resets UP1P settings to their default values.
cur
Displays the current ACL Update User Priority parameters.