Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 149
ACL Re-mark Out-of-Profile configuration
Command: /cfg/acl/acl <ACL number>/re-mark/outprof
[Re-marking - Out Of Profile Menu]
updscp - Set the update DSCP
reset - Reset out of profile settings
cur - Display current settings
Table 170 ACL Re-mark Out-of-Profile Configuration Menu options
Command
Description
updscp <0-63>
Sets the DiffServ Code Point (DSCP) of Out-of-Profile packets to the
selected value. The switch sets the DSCP value on Out-of-Profile packets.
reset
Resets the update DSCP parameters for Out-of-Profile packets to their
default values.
cur
Displays the current ACL re-mark out-profile parameters.
ACL Packet Format configuration
Command: /cfg/acl/acl <ACL number>/pktfmt
[Filtering Packet Format Menu]
ethfmt - Set to filter on ethernet format
tagfmt - Set to filter on ethernet tagging format
reset - Reset all fields
cur - Display current parameters
The following table describes the Packet Format Configuration Menu options.
Table 171 Packet Format Configuration Menu options
Command
Description
ethfmt eth2|snap|llc
Defines the Ethernet format for the ACL.
tagfmt none|tagged
Defines the tagging format for the ACL. The default is none.
reset
Resets Packet Format parameters for the ACL to their default values.
cur
Displays the current Packet Format parameters for the ACL.
ACL Group configuration
Command: /cfg/acl/group <ACL number>
[ACL Group 1 Menu]
add - Add ACL to group
rem - Remove ACL from group
cur - Display current ACL items in group
This menu allows you to compile one or more ACLs into an ACL Group. Once you create an ACL Group,
you can assign the ACL Group to one or more ports.
The following table describes the ACL Group Configuration Menu options.
Table 172 ACL Group Configuration Menu options
Command
Description
add acl <1-384>
Adds the selected ACL to the ACL Group.
rem acl<1-384>
Removes the selected ACL from the ACL Group.
cur
Displays the current ACL group parameters.