Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 150
Remote Monitoring configuration
Command: /cfg/rmon
[RMON Menu]
hist - RMON History Menu
event - RMON Event Menu
alarm - RMON Alarm Menu
cur - Display current RMON configuration
Remote Monitoring (RMON) allows you to monitor traffic flowing through the switch. The RMON MIB is
described in RFC 1757.
The following table describes the RMON Configuration Menu options.
Table 173 RMON Menu options
Command
Description
hist
Displays the RMON History Menu.
event
Displays the RMON Event Menu.
alarm
Displays the RMON Alarm Menu.
cur
Displays the current RMON configuration.
RMON history configuration
Command: /cfg/rmon/hist <1-65535>
[RMON History 1 Menu]
ifoid - Set interface MIB object to monitor
rbnum - Set the number of requested buckets
intrval - Set polling interval
owner - Set owner for the RMON group of statistics
delete - Delete this history and restore defaults
cur - Display current history configuration
The switch supports up to five History Groups.
The following table describes the RMON History Menu options.
Table 174 RMON History Menu options
Command
Description
ifoid <1-127 characters>
Configures the interface MIB Object Identifier. The IFOID must
correspond to the standard interface OID, as follows:
1.3.6.1.2.1.2.2.1.1.x
The interface OID can have a maximum of 127 characters.
rbnum <1-65535>
Configures the requested number of buckets, which is the number of
discrete time intervals over which data is to be saved.
The range is from 1 to 65535. The default is 30.
intrval <1-3600>
Configures the time interval over which the data is sampled for each
bucket.
The range is from 1 to 3600 seconds. The default value is 1800 seconds.
owner <1-127 characters>
Enter a text string that identifies the person or entity that uses this history
index.
The owner can have a maximum of 127 characters.
delete
Deletes the selected history index.
cur
Displays the current RMON History parameters.