Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 151
RMON event configuration
Command: /cfg/rmon/event <1-65535>
[RMON Event 1 Menu]
descn - Set description for the event
type - Set event type
owner - Set owner for the event
delete - Delete this event and restore defaults
cur - Display current event configuration
The following table describes the RMON Event Menu options.
Table 175 RMON Event Menu options
Command
Description
descn <1-127 characters>
Enter a text string to describe the event.
The description can have a maximum of 127 characters.
type none|log|trap|both
Selects the type of notification provided for this event. For log events, an
entry is made in the log table and sent to the configured syslog host. For
trap events, an SNMP trap is sent to the management station.
owner <1-127 characters>
Enter a text string that identifies the person or entity that uses this event
index.
The owner can have a maximum of 127 characters.
delete
Deletes this event index.
cur
Displays the current RMON Event parameters.
RMON alarm configuration
Command: /cfg/rmon/alarm <1-65535>
[RMON Alarm 1 Menu]
oid - Set MIB oid datasource to monitor
intrval - Set alarm interval
sample - Set sample type
almtype - Set startup alarm type
rlimit - Set rising threshold
flimit - Set falling threshold
revtidx - Set event index to fire on rising threshold crossing
fevtidx - Set event index to fire on falling threshold crossing
owner - Set owner for the alarm
delete - Delete this alarm and restore defaults
cur - Display current alarm configuration
The Alarm RMON group can track rising or falling values for a MIB object. The MIB object must be a
counter, gauge, integer, or time interval. Each alarm index must correspond to an event index that
triggers once the alarm threshold is crossed. The switch supports up to 30 Alarm Groups.