Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 155
Link to Monitor (LtM) configuration
Command: /cfg/ufd/fdp <FDP number>/ltm
[Failure Link to Monitor Menu]
addport - Add port to Link to Monitor
remport - Remove port from Link to Monitor
addtrnk - Add trunk to Link to Monitor
remtrnk - Remove trunk from Link to Monitor
addkey - Add adminkey to Link to Monitor
remkey - Remove adminkey from Link to Monitor
cur - Display current LtM configuration
The following table describes the Link to Monitor (LtM) Menu options. The LtM can consist of only one
uplink port (ports 18-21), a single trunk containing only uplink ports, or a single LACP trunk group
containing only uplink ports.
Table 181 Link to Monitor Menu options
Command
Description
addport <port number>
Adds a port to the LtM. Only uplink ports (18-21) are allowed in the LtM.
remport <port number>
Removes a port from the LtM.
addtrnk <1-12>
Adds a trunk group to the LtM. The LtM trunk group can contain only uplink
ports (18-21).
remtrnk <1-12>
Removes a trunk group from the LtM.
addkey <LACP port
adminkey>
Adds a LACP trunk group to the LtM. The LtM LACP trunk group can contain
only uplink ports (18-21).
remkey <LACP port
adminkey>
Removes a LACP trunk group from the LtM.
cur
Displays the current LtM configuration.
Link to Disable configuration
Command: /cfg/ufd/fdp <FDP number>/ltd
[Failure Link to Disable Menu]
addport - Add port to Link to Disable
remport - Remove port from Link to Disable
addtrnk - Add trunk to Link to Disable
remtrnk - Remove trunk from Link to Disable
addkey - Add adminkey to Link to Disable
remkey - Remove adminkey from Link to Disable
cur - Display current LtD configuration
The following table describes the Link to Disable (LtD) Menu options. The LtD can consist of any mix of
downlink ports (ports 1-16) and trunk groups that contain only downlink ports and LACP trunk groups that
contain only downlink ports.
Table 182 Link to Disable Menu options
Command
Description
addport <port number>
Adds a port to the current LtD group. Only downlink ports (1-16) are allowed
in the LtD.
remport <port number>
Removes a port from the current LtD group.
addtrunk <1-12>
Adds a trunk group to the current LtD group. LtD trunk groups can contain
only downlink ports (1-16).
remtrunk <1-12>
Removes a trunk group from the current LtD group.
addkey <LACP port
adminkey>
Adds a LACP trunk group to the current LtD group. LtD LACP trunk groups can
contain only downlink ports (1-16).
remkey <LACP port
adminkey>
Removes a LACP trunk group from the current LtD group.
cur
Displays the current LtD configuration.