Command Reference Guide
Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here.  159 
Operations-level port 802.1x options 
Command: /oper/port <port number>/8021x 
[802.1x Operation Menu] 
 reset - Reinitialize 802.1x access control on this port 
 reauth - Initiate reauthentication on this port now 
Operations-level port 802.1x options are used to temporarily set 802.1x parameters for a port. This menu is 
available only from an administrator login. 
Table 185  Operations-Level Port 802.1x Menu options 
Command 
Description 
reset 
Re-initializes the 802.1x access-control parameters for the port. The following 
actions take place, depending on the 802.1x port configuration: 
  force unauth - the port is placed in unauthorized state, and traffic is 
blocked.  
  auto - the port is placed in unauthorized state, then authentication is 
initiated. 
  force auth - the port is placed in authorized state, and authentication is 
not required.  
reauth 
Re-authenticates the supplicant (client) attached to the port. This command 
only applies if the port‘s 802.1x mode is configured as auto.  
Operations-level VRRP options 
Command: /oper/vrrp 
[VRRP Operations Menu] 
 back - Set virtual router to backup 
Operations-level VRRP options are described in the following table. 
Table 186  Operations-Level VRRP Menu options 
Command 
Description 
back <1-250> 
Forces the specified master virtual router on this switch into backup mode. This is 
generally used for passing master control back to a preferred switch once the 
preferred switch has been returned to service after a failure. When this 
command is executed, the current master gives up control and initiates a new 
election by temporarily advertising its own priority level as 0 (lowest). After the 
new election, the virtual router forced into backup mode by this command will 
resume master control in the following cases: 
  This switch owns the virtual router (the IP addresses of the virtual router and 
its IP interface are the same) 
  This switch‘s virtual router has a higher priority and preemption is enabled. 
  There are no other virtual routers available to take master control. 










