Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 25
The following table describes the SNMPv3 Access Table information.
Table 11 SNMPv3 Access Table parameters
Field
Description
Group Name
Displays the name of group.
Model
Displays the security model used, for example, SNMPv1, or SNMPv2 or USM.
Level
Displays the minimum level of security required to gain rights of access. For
example, noAuthNoPriv, authNoPriv, or auth-Priv.
ReadV
Displays the MIB view to which this entry authorizes the Read access.
WriteV
Displays the MIB view to which this entry authorizes the Write access.
NotifyV
Displays the MIB view to which this entry authorizes the Notify access.
SNMPv3 Group Table information
Command: /info/sys/snmpv3/group
Sec Model User Name Group Name
---------- ----------------------------- -------------------------------
snmpv1 v1v2only v1v2grp
usm adminmd5 admingrp
usm adminsha admingrp
A group is a combination of security model and security name that defines the access rights assigned to
all the security names belonging to that group. The group is identified by a group name.
The following table describes the SNMPv3 Group Table information.
Table 12 SNMPv3 Group Table parameters
Field
Description
Sec Model
Displays the security model used, which is any one of: USM, SNMPv1, SNMPv2, and
SNMPv3.
User Name
Displays the name for the user.
Group Name
Displays the access name of the group.
SNMPv3 Community Table information
Command: /info/sys/snmpv3/comm
Index Name User Name Tag
---------- ---------- -------------------- ----------
trap1 public v1v2only v1v2trap
This command displays the community table information stored in the SNMP engine.
The following table describes the SNMPv3 Community Table information.
Table 13 SNMPv3 Community Table parameters
Field
Description
Index
Displays the unique index value of a row in this table.
Name
Displays the community string.
User Name
Displays the User Security Model (USM) user name.
Tag
Displays the community tag.
SNMPv3 Target Address Table information
Command: /info/sys/snmpv3/taddr
Name Transport Addr Port Taglist Params
---------- --------------- ---- ---------- ---------------
trap1 47.81.25.66 162 v1v2trap v1v2param
This command displays the SNMPv3 target address table information.
The following table describes the SNMPv3 Target Address Table information.