Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 26
Table 14 SNMPv3 Target Address Table parameters
Field
Description
Name
Displays the locally arbitrary, but unique identifier associated with this
snmp TargetAddrEntry.
Transport Addr
Displays the transport addresses.
Port
Displays the SNMP UDP port number.
Taglist
This column contains a list of tag values which are used to select target addresses
for a particular SNMP message.
Params
The value of this object identifies an entry in the snmpTargetParamsTable. The
identified entry contains SNMP parameters to be used when generating messages
to be sent to this transport address.
SNMPv3 Target Parameters Table information
Command: /info/sys/snmpv3/tparam
Name MP Model User Name Sec Model Sec Level
------------------- -------- -------------------- --------- -----------
v1v2param snmpv2c v1v2only snmpv1 noAuthNoPriv
The following table describes the SNMPv3 Target Parameters Table information.
Table 15 SNMPv3 Target Parameters Table
Field
Description
Name
Displays the locally arbitrary, but unique identifier associated with this
snmpTargeParamsEntry.
MP Model
Displays the Message Processing Model used when generating SNMP messages
using this entry.
User Name
Displays the securityName, which identifies the entry on whose behalf SNMP
messages will be generated using this entry.
Sec Model
Displays the security model used when generating SNMP messages using this entry.
Sec Level
Displays the level of security used when generating SNMP messages using this entry.
SNMPv3 Notify Table information
Command: /info/sys/snmpv3/notify
Name Tag
-------------------- --------------------
v1v2trap v1v2trap
The following table describes the SNMPv3 Notify Table information.
Table 16 SNMPv3 Notify Table
Field
Description
Name
The locally arbitrary, but unique identifier associated with this snmpNotifyEntry.
Tag
This represents a single tag value which is used to select entries in the
snmpTargetAddrTable. Any entry in the snmpTargetAddrTable that contains a
tag value equal to the value of this entry is selected. If this entry contains a value of
zero length, no entries are selected.