Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 34
The following table describes the IEEE 802.1x parameters.
Table 21 802.1x information
Field
Description
Port
Displays each port‘s name.
Auth Mode
Displays the Access Control authorization mode for the port. The
Authorization
mode can be one of the following:
force-unauth
auto
force-auth
Auth Status
Displays the current authorization status of the port, either authorized or
unauthorized.
Authenticator PAE State
Displays the Authenticator Port Access Entity State. The PAE state can be
one of the following:
initialize
disconnected
connecting
authenticating
authenticated
aborting
held
forceAuth
Backend Auth State
Displays the Backend Authorization State. The Backend Authorization
state can be one of the following:
request
response
success
fail
timeout
idle
Spanning Tree information
Command: /info/l2/stp
------------------------------------------------------------------
upfast disabled, update 40
------------------------------------------------------------------
Spanning Tree Group 1: On (STP/PVST+)
VLANs: 1
Current Root: Path-Cost Port Hello MaxAge FwdDel
8000 00:02:a5:d1:0f:ed 8 20 2 20 15
Parameters: Priority Hello MaxAge FwdDel Aging
32768 2 20 15 300
Port Priority Cost FastFwd State Designated Bridge Des Port
---- -------- ---- -------- ---------- --------------------- -------
1 0 0 n FORWARDING *
2 0 0 n FORWARDING *
3 0 0 n FORWARDING *
The switch software uses the IEEE 802.1d Spanning Tree Protocol (STP). If RSTP/MSTP is turned on, see the
―Rapid Spanning Tree and Multiple Spanning Tree information‖ section for Spanning Tree Group
information. In addition to seeing if STP is enabled or disabled, you can view the following STP bridge
information:
Status of upfast (Uplink Fast)