Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 40
VLAN information
Command: /info/l2/vlan
VLAN Name Status Ports
---- -------------------------------- ------ ----------------
1 Default VLAN ena 1-16 18 19
10 VLAN 10 ena 20
20 VLAN 20 ena 21
4095 Mgmt VLAN ena 17
This information display includes all configured VLANs and all member ports that have an active link state.
VLAN information includes:
VLAN Number
VLAN Name
Status
Port membership of the VLAN
Layer 2 general information
Command: /info/l2/gen
STP uplink fast mode : disabled
The following table describes the Layer 2 general information.
Table 25 Layer 2 general information
Field
Description
STP uplink fast mode
Displays the status of STP Uplink Fast: enabled or
disabled.
Layer 3 information
Command: /info/l3
[Layer 3 Menu]
route - IP Routing Information Menu
arp - ARP Information Menu
ospf - OSPF Routing Information Menu
rip - RIP Routing Information Menu
ip - Show IP information
igmp - Show IGMP Snooping Multicast Group information
vrrp - Show Virtual Router Redundancy Protocol information
dump - Dump all layer 3 information