Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 41
The following table describes the Layer 3 Information Menu options.
Table 26 Layer 3 information menu options
Command
Usage
route
Displays the IP Routing Menu. Using the options of this menu, the system displays the
following for each configured or learned route:
Route destination IP address, subnet mask, and gateway address
Type of route
Tag indicating origin of route
Metric for RIP tagged routes, specifying the number of hops to the destination (1-
15 hops, or 16 for infinite hops)
The IP interface that the route uses
arp
Displays the Address Resolution Protocol (ARP) Information Menu.
ospf
Displays OSPF routing Information Menu.
rip
Displays Routing Information Protocol Menu.
ip
Displays IP Information. IP information, includes:
IP interface information: Interface number, IP address, subnet mask, VLAN
number, and operational status.
Default gateway information: Metric for selecting which configured gateway to
use, gateway number, IP address, and health status
IP forwarding information: Enable status, lnet and lmask
Port status
igmp
Displays IGMP Information Menu.
vrrp
Displays the VRRP Information Menu.
dump
Dumps all switch information available from the Layer 3 Menu (10K or more,
depending on your configuration).
Route information
Command: /info/l3/route
[IP Routing Menu]
find - Show a single route by destination IP address
gw - Show routes to a single gateway
type - Show routes of a single type
tag - Show routes of a single tag
if - Show routes on a single interface
dump - Show all routes
Using the commands listed below, you can display all or a portion of the IP routes currently held in the
switch.
Table 27 Route Information menu options
Command
Usage
find <IP address>
Displays a single route by IP address.
For example: 100.10.1.1
gw <IP address>
Displays routes to a single gateway.
For example: 100.10.1.2
type indirect|direct|local|
broadcast|martian|multicast
Displays routes of a single type.
tag fixed|static|addr|rip|ospf|
broadcast|martian|multicast
Displays routes of a single tag.
if <1-250>
Displays routes on a single interface.
dump
Displays all routes configured in the switch.