Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 54
RMON event information
Command: /info/rmon/event
RMON Event group configuration:
Index Type Last Sent Description
----- ---- ---------------- ---------------------------------
1 both 0D: 0H: 1M:20S Event_1
2 none 0D: 0H: 0M: 0S Event_2
3 log 0D: 0H: 0M: 0S Event_3
4 trap 0D: 0H: 0M: 0S Event_4
5 both 0D: 0H: 0M: 0S Log and trap event for Link Down
10 both 0D: 0H: 0M: 0S Log and trap event for Link Up
11 both 0D: 0H: 0M: 0S Send log and trap for icmpInMsg
15 both 0D: 0H: 0M: 0S Send log and trap for icmpInEchos
100 both 0D: 0H: 0M: 0S Event_100
The following table describes the RMON Event Information parameters.
Table 43 RMON Event Information Menu /info/rmon/event
Command
Usage
Index
Displays the index number that identifies each event instance.
Type
Displays the type of notification provided for this event, as follows: none, log, trap,
both.
Last Sent
Displays the time that passed since the last switch reboot, when the most recent event
was triggered. This value is cleared when the switch reboots.
Description
Displays a text description of the event.
Link status information
Command: /info/link
------------------------------------------------------------------
Port Speed Duplex Flow Ctrl Link
----- ----- -------- --TX-----RX-- ------
1 10000 full yes yes disabled
2 10000 full yes yes disabled
3 10000 full yes yes disabled
4 10000 full yes yes disabled
5 10000 full yes yes disabled
6 10000 full yes yes disabled
7 10000 full yes yes disabled
8 10000 full yes yes disabled
9 10000 full yes yes disabled
10 10000 full yes yes disabled
11 10000 full yes yes disabled
12 10000 full yes yes disabled
13 10000 full yes yes disabled
14 10000 full yes yes disabled
15 10000 full yes yes disabled
16 10000 full yes yes disabled
17 any any yes yes up
18 10000 full yes yes down
19 10000 full yes yes down
20 10000 full yes yes down
21 10000 full yes yes down