Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 55
Use this command to display link status information about each port on a switch, including:
Port number
Port speed (10 Mb/s, 100 Mb/s, 10000 Mb/s, or any)
Duplex mode (half, full, or any)
Flow control for transmit and receive (no, yes, or any)
Link status (up or down)
Port information
Command: /info/port
Port Tag RMON PVID NAME VLAN(s)
---- --- ---- ---- -------------- -------------------------------
1 n d 1 Downlink1 1
2 n d 1 Downlink2 1
3 n d 1 Downlink3 1
4 n d 1 Downlink4 1
5 n d 1 Downlink5 1
6 n d 1 Downlink6 1
7 n d 1 Downlink7 1
8 n d 1 Downlink8 1
9 n d 1 Downlink9 1
10 n d 1 Downlink10 1
11 n d 1 Downlink11 1
12 n d 1 Downlink12 1
13 n d 1 Downlink13 1
14 n d 1*Downlink14 1
15 n d 1*Downlink15 1
16 n d 1*Downlink16 1
17 n d 4095 Mgmt 4095
18 n d 1*Uplink1 1
19 n d 1*Uplink2 1
20 n d 1*Uplink3 1
21 n d 1*Uplink4 1
* = PVID is tagged.
Port information includes:
Port number
Whether the port uses VLAN tagging or not (y or n)
Whether Remote Monitoring (RMON) is enabled or disabled (e or d)
Port VLAN ID (PVID)
Port name
VLAN membership