Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 56
SFP information
Command: /info/sfp
Port Device TX-Enable RX-Signal TX-Fault
------ ------ --------- --------- --------
SFP21 FI-SFP **** NOT Installed ****
SFP22 FI-SFP **** NOT Installed ****
SFP23 FI-SFP enabled ok none
SFP24 FI-SFP enabled ok none
This command displays the status of the Small Form Pluggable (SFP) module on each Fiber External Port.
Uplink Failure Detection information
Command: /info/ufd
Uplink Failure Detection 1: Enabled
LtM status: Down
Member STG STG State Link Status
--------- --- ------------ -----------
port 20 down
1 DISABLED
10 DISABLED *
15 DISABLED *
* = STP turned off for this port.
LtD status: Auto Disabled
Member Link Status
--------- -----------
port 1 disabled
port 2 disabled
port 3 disabled
port 4 disabled
Uplink Failure Detection 2: Disabled
Uplink Failure Detection 3: Disabled
Uplink Failure Detection 4: Disabled
UFD (Uplink Failure Detection) information includes:
UFD status, either enabled or disabled
LtM status and member ports
Spanning Tree status for LtM ports
LtD status and member ports
Information dump
Command: /info/dump
Use the dump command to dump all switch information available from the Information Menu (10K or
more, depending on your configuration). This data is useful for tuning and debugging switch
performance.