Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 63
The following table describes the interface (IF) statistics for a selected port:
Table 49 Interface statistics for port
Statistics
Description
Octets—IfHCIn
The total number of octets received on the interface, including framing
characters.
UcastPkts—IfHCIn
The number of packets, delivered by this sublayer to a higher sublayer, which
were not addressed to a multicast or broadcast address at this sublayer.
BroadcastPkts—IfHCIn
The number of packets, delivered by this sublayer to a higher sublayer, which
were addressed to a broadcast address at this sublayer.
MulticastPkts—IfHCIn
The total number of packets, delivered by this sublayer. These are the
packets that higher-level protocols requested to be transmitted, and which
were addressed to a multicast address at this sublayer, including those that
were discarded or not sent.
For a MAC layer protocol, this includes both group and functional addresses.
Discards—IfHCIn
The number of inbound packets which were chosen to be discarded even
though no errors were detected to prevent their being delivered to a higher-
layer protocol.
Errors—IfHCIn
For packet-oriented interfaces, the number of inbound packets that
contained errors preventing them from being delivered to a higher-layer
protocol.
Octets—IfHCOut
The total number of octets transmitted out of the interface, including framing
characters.
UcastPkts—IfHCOut
The total number of packets that higher-level protocols requested to be
transmitted, and which were not addressed to a multicast or broadcast
address at this sublayer, including those that were discarded or not sent.
BroadcastPkts—IfHCOut
The total number of packets that higher-level protocols requested to be
transmitted, and which were addressed to a broadcast address at this
sublayer, including those that were discarded or not sent.
MulticastPkts—IfHCOut
The total number of packets that higher-level protocols requested to be
transmitted, and which were addressed to a multicast address at this
sublayer, including those that were discarded or not sent.
Discards—IfHCOut
The number of outbound packets that were chosen to be discarded even
though no errors had been detected to prevent their being transmitted.
Errors—IfHCOut
For packet-oriented interfaces, the number of outbound packets that could
not be transmitted because of errors. .
Internet Protocol (IP) statistics
Command: /stats/port <port number>/ip
GEA IP statistics for port 1:
ipInReceives : 0
ipInHeaderError: 0
ipInDiscards : 0