Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 77
RIP statistics
Command: /stats/l3/rip
RIP ALL STATS INFORMATION:
RIP packets received = 12
RIP packets sent = 75
RIP request received = 0
RIP response received = 12
RIP request sent = 3
RIP response sent = 72
RIP route timeout = 0
RIP bad size packet received = 0
RIP bad version received = 0
RIP bad zeros received = 0
RIP bad src port received = 0
RIP bad src IP received = 0
RIP packets from self received = 0
The following table describes the basic Routing Information Protocol (RIP) statistics :
Table 68 RIP Statistics
Statistics
Description
RIP packets received
The total number of RIP packets received.
RIP packets sent
The total number of RIP packets transmitted.
RIP request received
The total number of RIP requests received.
RIP response received
The total number of RIP response received.
RIP request sent
The total number of RIP requests transmitted.
RIP response sent
The total number of RIP responses transmitted.
RIP route timeout
The total number of RIP route timeouts.
RIP bad size packet received
The total number of bad size RIP packets received.
RIP bad version received
The total number of RIP bad versions received.
RIP bad zeros received
The total number of RIP bad zeros (RIPv1 packets with non-zero
unused fields) received.
RIP bad source port received
The total number of RIP bad source port received.
RIP bad source IP received
The total number of RIP bad source IP received.
RIP packets from self received
The total number of RIP packets from self received.
Management Processor statistics
Command: /stats/mp
[MP-specific Statistics Menu]
pkt - Show Packet stats
tcb - Show All TCP control blocks in use
ucb - Show All UDP control blocks in use
cpu - Show CPU utilization
The following table describes the MP-specific Statistics Menu options:
Table 69 MP-specific Statistics Menu
Command
Usage
pkt
Displays packet statistics, to check for leads and load.
tcb
Displays all Transmission Control Protocol (TCP) control blocks (TCB) that are in use.
ucb
Displays all User Datagram Protocol (UDP) control blocks (UCB) that are in use.
cpu
Displays CPU utilization for periods of up to 1, 4, and 64 seconds.