Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 8
Command line interface
Introduction
The 10Gb Intelligent L3 Switch is ready to perform basic switching functions right out of the box. Some of
the more advanced features, however, require some administrative configuration before they can be
used effectively.
The extensive switching software included in the switch provides a variety of options for accessing and
configuring the switch:
Built-in, text-based command line interfaces (AOS CLI and ISCLI) for access via a local terminal or
remote Telnet/Secure Shell (SSH) session
Simple Network Management Protocol (SNMP) support for access through network management
software such as NEC WebSAM NetvisorPro
A browser-based management interface for interactive network access through the Web browser
The command line interface is the most direct method for collecting switch information and performing
switch configuration. Using a basic terminal, you can view information and statistics about the switch,
and perform any necessary configuration.
This chapter explains how to access the AOS CLI to the switch.
Additional references
Additional information about installing and configuring the switch is available in the following guides,
which are attached in this product.
N8406-026 10Gb Intelligent L3 Switch User’s Guide
N8406-026 10Gb Intelligent L3 Switch Application Guide
N8406-026 10Gb Intelligent L3 Switch Command Reference Guide (ISCLI)
N8406-026 10Gb Intelligent L3 Switch Browser-based Interface Reference Guide
Connecting to the switch
You can access the command line interface in one of the following ways:
Using a console connection via the console port
Using a Telnet connection over the network
Using a Secure Shell (SSH) connection to securely log in over a network
Establishing a console connection
To establish a console connection with the switch, you need:
A null modem cable with a female DB-9 connector (See the N8406-026 10Gb Intelligent L3 Switch
User’s Guide for more information.)
An ASCII terminal or a computer running terminal emulation software set to the parameters shown in
the table below
Table 1 Console configuration parameters
Parameter
Value
Baud Rate
9600
Data Bits
8
Parity
None
Stop Bits
1
Flow Control
None